Home └ Gateways └ How do I connect a DEIF BGC-2 to the Impulse gateway?

How do I connect a DEIF BGC-2 to the Impulse gateway?

1

.

Instructions

Please note! You will need a USB expansion card for your Impulse gateway to complete this installation.

To connect the DEIF BGC-2 to the Impulse gateway, you need the following components:

  • o DEIF programming interface Basic Genset Controller: RJ11 to RS232
  • o StarTech ICUSB2322F: 1x USB to 2x RS232
  • o StarTech SCNM9FF1MBK: RS232 female to RS232 female (null-modem cable)

If you want to connect two BGC-2s to one gateway, you will need two null modem cables.

1. Connect the DEIF BGC-2 to the programming interface via the RJ11 socket.


2. Connect the programming interface to the null-modem cable.


3. Connect the null-modem cable to the RS232 <> USB cable.

 


4. Connect the RS232 <> USB cable to the USB connector of the Impulse gateway.

 


5. (Optional) Repeat steps 1-4 with the remaining RS232 port to connect a second DEIF BGC-2 to your gateway.


Advanced Add Tag

Content

Need Support?

Can’t find the answer you’re looking for? Don’t worry we’re here to help!

Ask For Help
Language Choice Disclaimer

These texts have been automatically translated using advanced AI translation tools. If you notice any inaccuracies or errors, please help us improve by sending a message to hello@calculus.group. Your feedback assists us in enhancing the quality of our multilingual documentation.