1
.
Stappenplan
Step 1: Insert the pressure sensor into the riser tube. The sensor hangs best 1cm above the bottom of the tank. Fix the pressure sensor by tightening the swivel.
Step 2: Insert the plug of the extension cable through the gland of the cover plate and connect to the base module. The module is equipped with magnetic feet for easy mounting.
Step 3: Connect the two connectors together. Your tank monitor is now ready for use.
Step 4: Unplug the base module when not using or transporting. Pull the plug out through the swivel and place the base module on the inside of the cover. This will keep everything safely stored during transport.
